*8-4 Group 2 Seb Fall 2009

Completed Project

2010-01-15T14:05:00.000-08:00

Wensday- 1-13-2010

2010-01-13T08:36:00.001-08:00

WE ARE DONE!!!!

Wensday- 1-13-2010

2010-01-13T07:52:00.000-08:00

Today we are finishing up the project. And making some posters. Hopefully. While burning off the extra screws that were coming off the side I burned my fingers. That didn't tickle! But I am okay. :D But my fingers are a little numb.

Monday- 1-11-2010

2010-01-11T08:28:00.001-08:00

Today we thought we were done with the board. But the glass broke. So we have to fix things. Great...

Wensday- 1-6-2010

2010-01-06T08:02:00.000-08:00

Today we are attaching the picture frame finally. I hope things work out better today! :)

Janurary 4th, 2010

2010-01-04T07:05:00.000-08:00

Today we attempted to put the picture frame on the skateboard. Did not go so well.

Wensday- 12, 16, 2009

2009-12-16T07:53:00.000-08:00

Today we are going to paint the picture frame. And do some fixing on the skateboard paint job. And maybe attaching the wooden frame to the skateboard. Depends how today's class goes.

Monday- 12-14-2009

2009-12-14T07:51:00.002-08:00

Today we are trying to figure out how we are going to attach the glass/ wood to the skateboard.

Wensday- 12- 9-2009

2009-12-14T07:51:00.001-08:00

We used the spindle sander to make is not so ruff.

Monday- 12-7-2009

2009-12-07T07:55:00.000-08:00

Today we are using the jigsaw to cut a hole

Wensday- 12-2-2009

2009-12-07T07:54:00.000-08:00

Today we made holes in the skateboard.

Monday- Nov. 30 .2009

2009-11-30T07:55:00.000-08:00

Today we are trying to figure out how to put the picture frame on the skateboard. This is going to be harder than be thought.

November 18, 2009- wensday

2009-11-19T09:49:00.000-08:00

Today we painted the other side of the skateboard blue. Then we put yellow hand prints on it. It looks really good. Only 2 group member put there hands on there.

November 16, 2009- monday

2009-11-19T09:47:00.001-08:00

Today we splattered paint on our skateboard. It turned our bad the first time because we put sponges on it. So we had to re- paint it over again. then splatter the paint again. Now it looks good.

November 11, 2009- wensday

2009-11-19T09:45:00.000-08:00

Today we painted our skateboard all black

greensquid- prototype

2009-11-04T08:04:00.000-08:00

here is my original prototype.

orginal prototype

2009-11-04T08:00:00.000-08:00

here was my original prototype

2009-11-02T08:08:00.000-08:00

Here is our prototype. It supposed to be a picture frame on a skateboard.

Week 1

2009-10-19T08:15:00.000-07:00

Everything before this post is not fall of 2009. We have a group of 3 people. We want to do a skateboard picture frame. We have done a prototype on the computer.

Week #7

2009-05-29T07:53:00.000-07:00

This week our teacher got us a cabinet with doors and a cabinet without doors. We are trying to figure out what one we want to use.

week 6

2009-04-15T08:03:00.000-07:00

We are working on figuring out our logo, sending a budget e-mail and just making plans of what and how we're going to do the project.

Week #5.

2009-04-08T08:20:00.000-07:00

this week we are working on figuring out how much all the materials will cost and finishing up our prototype so that we can start building. Our prototypes are due by next week.

week 5

2009-04-08T08:15:00.000-07:00

This week our group has been working on fixing our prototype and making it our final one. We have to have our parents go on our blog and leave a couple comments too. Also our I.T. teacher thought us how to use the power tool for next week when we start building our product so we know what we are doing!

from 8-4 group 2

Video In Class

2009-04-03T08:34:00.000-07:00

On Wednesday we watched a video about prototypes. It showed how that they made three prototypes and only one worked. We learned that just because we think it will work doesn't mean that it will and we might have to keep making prototypes until we find one that works and then make our final project.

Week #4!

2009-04-01T08:06:00.000-07:00

This week we are still working on finishing our prototype, we are pretty much done with that. Now we are looking online at how much wood, screws, and paint will cost for our project. We plan to be done with our prototype by the end of the week so that we can present it to the class and so that we can get started on making our final project.

week3

2009-03-25T08:12:00.000-07:00

This week we still have been working on how much would coast for the wood, paint, nails, and other applencecs.

Wednesday 3/18/09

2009-03-18T08:36:00.000-07:00

Today we are working on making new prototypes because the product that we are making is not the way our customer would like it, the customer would rather have it go a different way, right now it is standing tall and the customer would rather have it going side ways (laying down). We have been talking about how to do prototypes in class and we have been working on the also. We also have been looking for some wood to make our product with. Well thats what we have been doing in class.

week #2

2009-03-18T08:09:00.000-07:00

This week we are redoing our prototype because our customer wants it a different way. So we are making new measurements and finding wood online that we want to use.

week2

2009-03-18T08:05:00.000-07:00

this week we have to pick out wood for the shelf and we also need to fix our prototype! We have been in and out the last couple of days meeting with our customer to see how long wide and other length that invole our project! We have been moving along with discovering how it would fit our customer room and stuff!

What we are doing

2009-03-11T08:39:00.000-07:00

we will start from scratch instead of refurbishing.

Our I.T. Project!

2009-03-11T08:29:00.001-07:00

The last couple of weeks we have been figuring out we want to do for our I.T project! My group is purpleberry54813,purplepenguin4813,chatterbox, and i noodledoodle4813 deceided that we are going to make better laptop shelfs for Mrs.Hopkins. What we have got done so far is sketching out our shelf on sketch up and decising how its going to look when we are done with it.

2009-03-11T08:29:00.000-07:00

The past couple of weeks my group which consists of Purpleberry54813, Noodledoodle4813, Purplepenguin4813, and me chatterbox4813. We have been making a sketch of our project and figuring out what we are going to do. We are going to make a laptop shelf.

Starting of our project

2009-03-11T08:27:00.002-07:00

Everything before this was done before 2009 spring.

2009-03-11T08:27:00.001-07:00

Everything before this point is not Sebasticook Spring '09.
Our project is for a teacher in our school. We are going to refurbish her laptop racks and turn them into one and paint, add shelves, etc. We have a prototype and are looking forward to building.

THE WEEK

2009-03-11T08:27:00.000-07:00

Everything before this was done before 2009 spring!

WE FINISHED

2008-12-17T09:51:00.000-08:00

HERE are SOME pictures OF our FINISHED product

Sweeping

2008-12-10T10:10:00.000-08:00

Today we swept thew shed and put some metal sheets onto the shelves.

14th post

2008-12-10T10:06:00.000-08:00

Today we moved the the ping pong tables and the platforms and the shed looks a lot cleaner.

13th class

2008-12-10T10:03:00.000-08:00

We are almost done with our project all we have to do is get the trash out and get it checked.

our people working on it

2008-12-09T09:33:00.000-08:00

12th week

2008-12-05T08:18:00.000-08:00

so far what we've done is this:
its much better than it was when we started

Prototype

2008-11-07T06:05:00.001-08:00

Here is our prototype we made it in sketchup

10th post

2008-10-31T08:13:00.000-07:00

Today we put up the football things into the rafters and the shelves.

8th and ninth post

2008-10-31T08:12:00.000-07:00

we have been taking photos and making videos which will be on the next post

7th post

2008-10-29T09:54:00.001-07:00

Today we moved the ping pong table and continued to organize the shed

6th class

2008-10-29T09:53:00.001-07:00

Today we were organizing the shed and cleaning it out

Classes 4 and 5

2008-10-22T09:53:00.001-07:00

we have been cleaning and organizing the football shed and we have also been making our blueprint on sketchup

not ours

2008-10-16T08:30:00.000-07:00

all of the posts about computers are NOT OURS

our customer

2008-10-14T07:15:00.000-07:00

mr. hughs and mr. finnimore

poject

2008-10-07T07:15:00.000-07:00

our project is to clean up the shed and to redesign it.

FINISHED COMPUTER!

2008-06-25T05:37:00.000-07:00

Programing and Games

2008-06-11T09:05:00.000-07:00

In the picture to the left, we have the CD ROM that we had to put in the computer to download something on the computer. In the picture to the right, it shows the screen when the program was done downloading.

This is a picture of when we were playing games on the computer to see if it worked good or if anything was wrong but nothing was.

Turning on the Computer

2008-06-09T10:12:00.000-07:00

In the picture to the right, we are plugging in the monitor, mouse, and keyboard. In the picture to the left, we are plugging in the power to the computer so it will turn on.

In the picture to the right, we are pressing the power button to turn on the computer. In the picture to the left, it shows inside the computer with the wires out of the way. As you can see, in the class before this one, we zip tied the wires out of the way so you can see inside of the computer better.

In this picture, we are putting the side of the computer on and plugging in the fan.

Wiring the computer

2008-06-02T10:26:00.000-07:00

In the both of these pictures, we are connecting the power supply to the motherboard. We did this by looking at the booklet and looking at what goes where.

In these pictures, we plugged different cords such as the hard drive to the motherboard and other cords.

Putting in the CPU

2008-06-02T10:13:00.000-07:00

In the picture to the right, we are putting in the fan which clips in. We placed this on a spot on the motherboard. In the picture to the left, we put in the CPU chip into the spot where it goes on the motherboard.

In this picture, the CPU chip and the fan are on the motherboard and the fan is wired in so it will work.

Motherboard

2008-05-13T11:37:00.000-07:00

In the picture to the left, we are putting in a new thing in the back of the computer so all of the plug ins will fit. To do this, we just unscrewed a screw inside of the computer to get the old one out and we popped in the new one from the inside of the computer.

In the picture to the right, there is a picture of the motherboard in the box.

In the picture to the left, there is a picture of a metal thing that was inside of the computer. We took it out because we have to put the motherboard on it. We put 6 screws on it so the motherboard will stay.

In the picture to the right, we set the motherboard on top of the screws that are sitting on the metal thing.

In this video, we are putting screws in the motherboard so it will stay on the metal thing.

In the picture to the left, it shows the motherboard that has screws in it connecting to the metal thing.

In the picture to the right, we put the motherboard inside of the computer.

CD ROM and Hard Drive

2008-05-13T11:27:00.000-07:00

In the picture to the left, we are taking off the sides of the computer by unscrewing the thumbscrews and the other screws with a screw driver.

To the right, there is a picture with both of the sides of the computer off. We took off the sides so we can put things in easier.

In the picture on the left, we are sliding the CD ROM into the highest slot of the computer to slide it in.

In the picture on the right, we are putting screws in it to attach it to the computer so it will stay.

In the picture to the left, we are putting the hard drive into the compter. We slid it in the lowest slot on the inside of the front of the computer.

In the picture to the right, we are putting srews in the hard drive to attach it to the computer so it will stay.

Getting the Computer Out of the Box

2008-04-17T06:49:00.001-07:00

In the picture on the left, we are opening the box with a box cutter that the computer is in.

In the picture on the right, we are getting ready to take the computer out of the box. To take it out, we had one person hold on to the end of the box and another person pulled out the computer gently.

In the picture on the left, the computer is out of the box with Styrofoam on the sides. We pulled the Styrofoam off the sides of the computer and took of the plastic.

In the picture on the right, we took off the door of the computer by unscrewing these things called thumb screws and after those are off, you can lift up the door. Inside, you can see some wires that connect to things in the computer and the power supply.

We are putting things on the bottom of the computer to protect the bottom of the computer. All we had to do was push them in.

This is a video of us putting the computer back together.

How Computers Are Made

2008-04-16T12:46:00.000-07:00

We watched a DVD's in class on how computers, processers, and CD's are made.

How is a computer like a person?

2008-04-02T05:23:00.000-07:00

Input/Output-
- keyboard/mouse- hands and feet (movement)
- CDROM/floppy/USB- mouth, ears, eyes
- video cord/monitor- eyes
- audio card/headphones/speakers- ears

Body/Parts-
- CPU- brain
- RAM- random access memory, short term
- hard drive- memory (long)
- motherboard- spinal cord, nervous system

Taking a junk computer apart again.

2008-03-26T06:47:00.000-07:00

These are the RAM sticks and the video card that we took out.

We took out the fan.

This is the motherboard that we removed and put back together as well as the other parts.

Taking a junk computer apart.

2008-03-25T07:02:00.000-07:00

Taking out the hard drive

Taking off the cover of the computer.

In this class, we took apart a computer and put it back together.

The Case

2008-03-12T06:08:00.000-07:00

This is the case we want:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811144045

Buying a Case

2008-03-12T05:52:00.000-07:00

Issues buying a case-
-Site problems
*How long have they been around?
*Can you get stuff?
*Cost- does it "bait & switch" or up shipping cost?
-Check Sites
*resellerrating.com
*bbb.org
-Secure transaction
*Safe use of credit card

Case Criteria-
1. $50 or less. Include shipping and power supply
2. newegg.com
3. Fit micro and TX motherboard

Case Notes

2008-03-07T07:32:00.001-08:00

Materials- steel, plastic, aluminum
Size- mid tower
Color- any
Design- (windows lights)
Power supply

Our Case

2008-03-07T07:29:00.000-08:00

Our Case

Somerset

2008-03-07T07:27:00.000-08:00

Everything before this is not Somerset spring 2008.

Completed Computer

2008-01-13T06:51:00.001-08:00

New group

2007-10-11T06:01:00.000-07:00

this is a new people.

day 34

2007-06-08T06:19:00.000-07:00

working on splash page

day 33

2007-06-08T06:18:00.000-07:00

doing splash page

day 32

2007-06-08T06:17:00.000-07:00

worked on podcast

day 31

2007-06-08T06:16:00.000-07:00

worked on podcast

day 30

2007-06-08T06:15:00.000-07:00

working on podcast

day 29

2007-05-21T08:59:00.001-07:00

did garge band.

day 28

2007-05-21T08:58:00.000-07:00

used Iweb for splash page

day 27

2007-05-15T08:55:00.000-07:00

Learned how to do podcast.

day 26

2007-05-11T06:20:00.000-07:00

worked on blogger

day 25

2007-05-09T05:58:00.001-07:00

worked on video

day 24

2007-05-09T05:56:00.000-07:00

working on video and story board and garage band

day 23

2007-05-09T05:54:00.000-07:00

worked on video and garage band

day 22

2007-05-09T05:50:00.000-07:00

worked on storyboard

day 21

2007-05-09T05:49:00.000-07:00

worked on blogger

day 20

2007-05-09T05:48:00.000-07:00

worked on garage band and blogger

day 19

2007-05-09T05:46:00.001-07:00

WE WORKED ON THE STORY BOARD AND FINSHED IT.

day 18

2007-05-09T05:46:00.000-07:00

worked on story board

day17

2007-05-09T05:45:00.000-07:00

worked on video and story board

day 16

2007-05-09T05:44:00.001-07:00

working on blogger

day 15

2007-05-09T05:42:00.000-07:00

working on video

day 14

2007-05-09T05:41:00.000-07:00

worked on garage band and storyboard.

day 13

2007-05-09T05:39:00.000-07:00

story board we worked on.

day 12

2007-05-09T05:38:00.000-07:00

am working on storyboard

day 11

2007-05-09T05:37:00.002-07:00

working on garage band

day 10

2007-05-09T05:37:00.001-07:00

working on blogger

Working on Video, Garage Band and Blogging

2007-05-02T12:24:00.000-07:00

day9

2007-05-02T05:40:00.001-07:00

worked on storyboard

DAY 8

2007-05-02T05:38:00.000-07:00

worked on garage band aND POST

day 7

2007-05-02T05:37:00.000-07:00

worked on garage band

day 6

2007-04-11T06:00:00.000-07:00

worked on blog

day 2

2007-04-11T05:59:00.000-07:00

Were given rules of mr. Kelly